All tutorials

Beginner 45 min read

Introduction to Acrylic Painting

Everything you need to start painting with acrylics, from choosing supplies to finishing your first small canvas.

Brush loaded with bright orange and red acrylic paint

Acrylics are the most forgiving way to start painting. They dry fast, clean up with water, and you can paint over a mistake within minutes. This guide takes you from a blank canvas to a finished small still life.

1. Set up your space

Work near a window if you can. Natural light shows colour more accurately than most bulbs. Lay down newspaper, fill two water jars (one for the first rinse, one for clean water), and squeeze out pea-sized amounts of each colour along the edge of your palette. Acrylics dry quickly, so put out a little at a time.

Tip: A light mist from a spray bottle keeps paint on your palette workable for much longer.

2. Learn the paint

Before you paint anything real, fill a scrap sheet with tests:

  • Mix a colour wheel. Make orange, green and violet from your primaries. Notice how a tiny touch of a strong colour (like blue) shifts a mix more than you expect.
  • Make a value scale. Mix five steps from pure white to black. Value (lightness and darkness) does more to make a painting read well than colour does.
  • Try consistencies. Paint a stroke straight from the tube, one thinned slightly with water, and a wash thinned a lot. Each has its own use.

3. Block in your composition

Set up a simple still life: one or two objects such as a mug and a piece of fruit, lit from one side. With a thinned neutral colour, sketch the main shapes directly onto the canvas. Keep it loose; this drawing will be covered.

Then use your large flat brush to block in the big areas of colour: background, table and objects. Don’t worry about detail yet. Aim to cover the whole canvas so there’s no white left showing.

4. Build up form

Once the first layer is touch-dry (usually 10–15 minutes), start modelling the objects:

  1. Mix a shadow colour for each object, darker and slightly cooler than its base colour.
  2. Mix a light colour, lighter and slightly warmer.
  3. Paint the shadow side, then the lit side, letting the base colour show in between as a mid-tone.
  4. Soften edges where light turns into shadow by blending while the paint is still wet.

5. Finish with details

Switch to your small brush for highlights, the edge of the table and any crisp lines. Less is more here. A single bright highlight on a piece of fruit can bring the whole painting to life.

Common beginner mistakes

  • Overworking. If the colours are turning muddy, let the layer dry and come back to it.
  • Using too little paint. Acrylic darkens slightly as it dries. Lay it on generously.
  • Letting brushes dry with paint in them. Dried acrylic ruins brushes. Keep them in water while you work and wash them with soap when you’re done.

Keep going

Paint the same setup three times in a week, changing only the lighting. You’ll learn more from that than from three different subjects. When you’re ready for feedback, bring your canvases along to an open studio night or a critique circle.